Netgear GSM7224 사용자 설명서

Switching Commands

8-69

This command deletes an existing VLAN. The ID is a valid VLAN identification number (ID 1 is 
reserved for the default VLAN). VLAN range is 2-4094.

no vlan <2-4094>

This command sets the frame acceptance mode per interface. For VLAN Only mode, untagged 
frames or priority frames received on this interface are discarded. For Admit All mode, untagged 
frames or priority frames received on this interface are accepted and assigned the value of the 
interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in 
accordance with the IEEE 802.1Q VLAN Specification.

} 

This command sets the frame acceptance mode per interface to Admit All. For Admit All mode, 
untagged frames or priority frames received on this interface are accepted and assigned the value 
of the interface VLAN ID for this port. With either option, VLAN tagged frames are forwarded in 
accordance with the IEEE 802.1Q VLAN Specification.

} 

This command enables ingress filtering. If ingress filtering is disabled, frames received with 
VLAN IDs that do not match the VLAN membership of the receiving interface are admitted and 
forwarded to ports that are members of that VLAN.