Netgear GSM7224 사용자 설명서

8-98

Switching Commands

This command sets the value, in seconds, of the timer used by the authenticator state machine on 
this port. Depending on the token used and the value (in seconds) passed, various timeout 
configurable parameters are set. The following tokens are supported.

reauth-period: Sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to determine when re-authentication of the supplicant takes place. The reauth-period must 
be a value in the range 1 - 65535.

quiet-period: Sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to define periods of time in which it will not attempt to acquire a supplicant. The quiet-
period must be a value in the range 0 - 65535.

tx-period: Sets the value, in seconds, of the timer used by the authenticator state machine on this 
port to determine when to send an EAPOL EAP Request/Identity frame to the supplicant. The 
quiet-period must be a value in the range 1 - 65535.

supp-timeout: Sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to timeout the supplicant. The supp-timeout must be a value in the range 1 - 65535.

server-timeout: Sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to timeout the authentication server. The supp-timeout must be a value in the range 1 - 
65535.

reauth-period: 3600 seconds

quiet-period: 60 seconds

tx-period: 30 seconds

supp-timeout: 30 seconds

server-timeout: 30 seconds

dot1x timeout {{reauth-period <seconds>} | {quiet-period <sec-
onds>} | {tx-period <seconds>} | {supp-timeout <seconds>} | 
{server-timeout <seconds>}}

Interface Config