Netgear GSM7224 사용자 설명서

Command Line Interface Structure

5-3

This parameter denotes a logical slot number and logical port 
number assigned. This is applicable in the case of a port-channel 
(LAG). The operator can use the logical slot number and the logi-
cal port number to configure the port-channel.

Network addresses are used to define a link to a remote host, workstation or network. Network 
addresses are shown using the following syntax:

Double quotation marks such as "System Name with Spaces" set off user defined strings. If the 
operator wishes to use spaces as part of a name parameter then it must be enclosed in double 
quotation marks.

Empty strings (““) are not valid user defined strings.

Command completion finishes spelling the command when enough letters of a command are typed 
to uniquely identify the command word. The command may be executed by typing <enter> 
(command abbreviation) or the command word may be completed by typing the <tab> or <space 
bar> (command completion).

The value 'Err' designates that the requested value was not internally accessible. This should never 
happen and indicates that there is a case in the software that is not handled correctly.

The value of '-----' designates that the value is unknown.

A.B.C.D

0.0.0.0 to 255.255.255.255
(decimal)

YY:YY:YY:YY:YY:YY

hexidecimal digit pairs