Netgear GSM7224 사용자 설명서

Switching Commands

8-13

A unicast MAC address for which the switch has forwarding and 
or filtering information. The format is 6 or 8 two-digit hexadeci-
mal numbers that are separated by colons, for example 
01:23:45:67:89:AB. In an IVL system the MAC address will be 
displayed as 8 bytes. In an SVL system, the MAC address will be 
displayed as 6 bytes.

The port which this address was learned.

This object indicates the ifIndex of the interface table entry asso-
ciated with this port.

The status of this entry. The meanings of the values are:

Static The value of the corresponding instance was added by the 
system or a user when a static MAC filter was defined. It cannot 
be relearned.

Learned The value of the corresponding instance was learned by 
observing the source MAC addresses of incoming traffic, and is 
currently in use.

Management The value of the corresponding instance (system 
MAC address) is also the value of an existing instance of 
dot1dStaticAddress. It is identified with interface 0/1 and is cur-
rently used when enabling VLANs for routing.

Self The value of the corresponding instance is the address of one 
of the switch’s physical interfaces (the system’s own MAC 
address).

GMRP Learned The value of the corresponding was learned via 
GMRP and applies to Multicast.

Other The value of the corresponding instance does not fall into 
one of the other categories.

This command displays the message log maintained by the switch. The message log contains 
system trace information.

The trap log contains a maximum of 256 entries that wrap. 

 

The message that has been logged.