Netgear GSM7224 사용자 설명서

8-22

Switching Commands

This command changes the name of the prompt. The length of name may be up to 64 alphanumeric 
characters.

set prompt <prompt string>

This command displays the timeout for address aging. In an IVL system, the [fdbid | all] parameter 
is required. In an SVL system, the [fdbid | all] parameter is not used and will be ignored if entered.

show forwardingdb agetime [fdbid | all] 

Fdbid (Forwarding database ID) indicates the forwarding data-
base whose aging timeout is to be shown. The all option is used to 
display the aging timeouts associated with all forwarding data-
bases. This field displays the forwarding database ID in an IVL 
system. This field will not be displayed in an SVL system.

Displays the address aging timeout for the associated forwarding 
database in IVL. In an SVL system, this will display the system's 
address aging timeout value in seconds.

This command displays configuration settings associated with the switch's network interface. The 
network interface is the logical interface used for in-band connectivity with the switch via any of 
the switch's front panel ports. The configuration parameters associated with the switch's network 
interface do not affect the configuration of the front panel ports through which traffic is switched 
or routed.