Netgear GSM7224 설치 가이드
Page 16 of 22
Figure 3-4. System Information.
5. The login name is “admin” and there is no password assigned. We strongly recommend that you assign
an admin password to secure access to the switch management function. After successful login, the
screen should show the (GSM7224)> prompt. Enter “show sysinfo” to display the management CPU’s
IP address. The switch is shipped using DHCP by default to receive its IP address. To manually set a
static IP address; you must first disable DHCP as follows:
screen should show the (GSM7224)> prompt. Enter “show sysinfo” to display the management CPU’s
IP address. The switch is shipped using DHCP by default to receive its IP address. To manually set a
static IP address; you must first disable DHCP as follows:
(GSM7224) >config network protocol none
Changing protocol mode will reset ip configuration.
Are you sure you want to continue? (y/n) y
When the system prompt displays, enter the following command:
(GSM7224) >config network parms 192.168.1.100 255.255.255.0 192.168.1.1
The example above uses “192.168.1.100” for the IP address, and “192.168.1.1” for the gateway IP
address. You should substitute your own IP addresses in the above command line.
address. You should substitute your own IP addresses in the above command line.