Netgear gsm7312 사용자 설명서

7-38

Switching Commands

This command sets how frequently Leave All PDUs are generated per port. A Leave All PDU 
indicates that all registrations will be unregistered. Participants would need to rejoin in order to 
maintain registration. The value applies per port and per GARP participation. The time may range 
from 200 to 6000 (centiseconds).

This command has an effect only when GVRP is enabled.

1000 centiseconds (10 seconds)

This command displays IGMP Snooping information. Configured information is displayed 
whether or not IGMP Snooping is enabled. Status information is only displayed when IGMP 
Snooping is enabled.

 

This indicates whether or not IGMP Snooping is active on the switch.

This displays the IGMP Query Interval Time. This is the amount of time a 
switch will wait for a report for a particular group on a particular interface 
before it sends a query on that interface. This value may be configured

This displays the amount of time the switch will wait after sending a query on an 
interface because it did not receive a report for a particular group on that 
interface. This value may be configured.

 

If a query is not received on an interface within this amount of time, the 
interface is removed from the list of interfaces with multicast routers attached. 
This value may be configured.

 

This is the list of interfaces on which IGMP Snooping is enabled.

 

This displays the number of multicast control frames that are processed by the 
CPU.

 

This displays the number of data frames that are forwarded by the CPU.