Netgear gsm7312 사용자 설명서

Switching Commands

7-53

This command adds an association between a multiple spanning tree instance and a VLAN. The 
VLAN will no longer be associated with the common and internal spanning tree. The instance 
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The 
<vlan> corresponds to an existing VLAN ID. 

This command removes an association between a multiple spanning tree instance and a VLAN. 
The VLAN will again be associated with the common and internal spanning tree. The instance 
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The 
<vlan> corresponds to an existing VLAN ID. 

This command sets the bridge priority for a specific multiple spanning tree instance. The instance 
<mstid> is a number that corresponds to the desired existing multiple spanning tree instance. The 
priority <value> is a number within a range of 0 to 61440 in increments of 4096. 

32768

This command sets the path cost for a specific port within a multiple spanning tree instance. The 
instance <mstid> is a number that corresponds to the desired existing multiple spanning tree 
instance. The <slot.port> is the desired switch port. The pathcost can be specified as a number in 
the range of 1 to 200000000 or auto.  If "auto" is specified, the pathcost value will be set based on 
Link Speed.

auto