Netgear gsm7312 사용자 설명서

Switching Commands

7-67

This command sets the value, in seconds, of the timer used by the authenticator state machine on 
the specified port to determine when to send an EAPOL EAP Request/Identity frame to the 
supplicant. The transmit period must be a value in the range of 1 and 65535. 

30

This command sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to timeout the supplicant. The supplicant timeout must be a value in the range of 1 and 
65535. 

30

This command sets the value, in seconds, of the timer used by the authenticator on this port to 
timeout the authentication server. The server timeout must be a value in the range of 1 and 65535.

 

30

config dot1x port servertimeout <slot.port> <1-65535>

This command sets the maximum number of times the authenticator state machine on this port will 
retransmit an EAPOL EAP Request/Identity before timing out the supplicant. The max requests 
value must be in the range of 1 and 10.

 

2

This command sets the value, in seconds, of the timer used by the authenticator state machine on 
this port to determine when reauthentication of the supplicant takes place. The reauthperiod must 
be a value in the range of 1 and 65535.