Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
8-2
Routing Commands
202-10009-01
VLAN Routing
show ip vlan
This command displays the VLAN routing information for all VLANs with routing enabled in the
system.
system.
Format
show ip vlan
MAC Address used
by Routing VLANs
The MAC Address associated with the internal bridge-router interface (IBRI).
The same MAC Address is used by all VLAN routing interfaces. It will be
displayed above the per-VLAN information.
displayed above the per-VLAN information.
VLAN ID
The identifier of the VLAN.
Logical Interface
Indicates the logical slot and port associated with the VLAN routing interface.
IP Address
Displays the IP Address associated with this VLAN.
Subnet Mask
Indicates the subnet mask that is associated with this VLAN.
config ip vlan routing create
This command creates routing on a VLAN. The <vlan> value has a range from 1 to 4094.
Format
config ip vlan routing create <vlan>
config ip vlan routing delete
This command deletes routing on a VLAN. The <vlan> value has a range from 1 to 4094.
Format config ip vlan-routing delete <vlan>
Router Commands
show router route table
This command causes the entire route table to be displayed. This commands takes no options.
Format
show router route table
Network Address
An IP address identifying the network on the specified interface.
Subnet Mask
A mask of the network and host portion of the IP address for the router interface.