Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Routing Commands
8-21
202-10009-01
Stub Mode
Represents whether the specified Area is a stub area or not. The possible values
are enabled and disabled. This is a configured value.
Import Summary LSAs
Metric Value
A number representing the Metric Value for the specified area.
Metric Type
The Default Metric Type for the specified Area.
show router ospf area range
This command displays information about the area ranges for the specified <areaid>. The <areaid>
identifies the OSPF area whose ranges are being displayed.
identifies the OSPF area whose ranges are being displayed.
Format
show router ospf area range <areaid>
Area ID
The area id of the requested OSPF area.
IP Address
An IP Address which represents this area range.
Subnet Mask
A valid subnet mask for this area range.
Lsdb Type
The type of link advertisement associated with this area range.
Advertisement
Indicates whether the advertisement status is enabled or disabled.
config router ospf area range create
This command creates a specified area range.
The <ipaddr> is a valid IP address.
The <subnetmask> is a valid subnet mask.
The [summ] is the lsdb type and is optional.
The [enable/disable] indicates advertise mode and is optional.
Format
config router ospf area range create <areaid> <ipaddr>
<subnetmask> [summ] [enable/disable]
config router ospf area range delete
This command deletes a specified area range.
The <ipaddr> is a valid IP address.
The <subnetmask> is a valid subnet mask.