Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Differentiated Services
9-31
202-10009-01
show diffserv policy detailed
This command displays all configuration information for the specified policy. The <policyname>
is the name of an existing DiffServ policy.
is the name of an existing DiffServ policy.
Format
show diffserv policy detailed <policyname>
Policy Name
The name of this policy.
Type
The policy type, namely whether it is an inbound or outbound policy definition.
The following information is repeated for each class associated with this policy (only those policy
attributes actually configured are displayed):
attributes actually configured are displayed):
Class Name
The name of this class.
Mark CoS
Denotes the class of service value that is set in the 802.1p header of outbound
packets. This is not displayed if the config diffserv policy mark cos command
was not specified.
packets. This is not displayed if the config diffserv policy mark cos command
was not specified.
Mark IP DSCP
Denotes the mark/re-mark value used as the DSCP for traffic matching this
class. This is not displayed if the config diffserv policy mark ipdscp command
was not specified, or if policing is in use for the class under this policy.
class. This is not displayed if the config diffserv policy mark ipdscp command
was not specified, or if policing is in use for the class under this policy.
Mark IP Precedence
Denotes the mark/re-mark value used as the IP Precedence for traffic matching
this class. This is not displayed if the config diffserv policy mark ipprecedence
command was not specified, or if either mark DSCP or policing is in use for the
class under this policy.
this class. This is not displayed if the config diffserv policy mark ipprecedence
command was not specified, or if either mark DSCP or policing is in use for the
class under this policy.
Policing Style
This field denotes the style of policing, if any, used (simple, single rate, or two
rate).
rate).
Committed Rate (Kbps)
This field displays the committed rate, used in simple policing, single-rate
policing, and two-rate policing.
policing, and two-rate policing.
Committed Burst Size (KB) This field displays the committed burst size, used in simple policing, single-rate
policing, and two-rate policing.
Excess Burst Size (KB)
This field displays the excess burst size, used in single-rate policing.
Peak Rate (Kbps)
This field displays the peak rate, used in two-rate policing.
Peak Burst Size (KB)
This field displays the peak burst size, used in two-rate policing.
Conform Action
The current setting for the action taken on a packet considered to conform to the
policing parameters. This is not displayed if policing is not in use for the class
under this policy.
policing parameters. This is not displayed if policing is not in use for the class
under this policy.
Conform DSCP Value
This field shows the DSCP mark value if the conform action is markdscp.
Conform IP Precedence Value This field shows the IP Precedence mark value if the conform action is
markprec.
Exceed Action
The current setting for the action taken on a packet considered to exceed to the
policing parameters. This is not displayed if policing not in use for the class
under this policy.
policing parameters. This is not displayed if policing not in use for the class
under this policy.