Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
ACL Commands
10-1
202-10009-01
Chapter 10
ACL Commands
Show Commands
The show commands show the current settings for a command.
show acl summary
This command displays a summary of the Access Control Lists (ACLs) that are associated with
interfaces in the system.
interfaces in the system.
Format
show acl summary
ACL ID
The ACL identifier.
Rules
The number of rules that are associated with this ACL.
Interface(s)
The interface in Slot.Port format that are associated with this ACL.
Direction
The packet filtering direction for the ACL on the interface. The possible values
are ‘inbound’ and ‘outbound’.
are ‘inbound’ and ‘outbound’.
show acl detailed
This command displays an Access Control List (ACL) and all of the rules that are defined for the
ACL. The
ACL. The
<aclid>
is the number used to identify the ACL.
Format
show acl detailed <aclid>
Rule Number
The number identifier for each rule that is defined for the ACL.
Action
The action associated with each rule. The possible values are Permit or Deny.
Protocol
The protocol to filter for this rule.
Source IP Address
Thee source IP address for this rule.
Source IP Mask
The source IP Mask for this rule.
Source Ports
The source port range for this rule.
Destination IP Address
The destination IP address for this rule.
Destination IP Mask
The destination IP Mask for this rule.
Destination Ports
The destination port range for this rule.