Netgear gsm7312 사용자 설명서
User Manual for the NETGEAR 7300 Series Layer 3 Managed Switch Software
Quick Startup
6-7
202-10009-01
Quick Startup Factory Defaults
Table 6-7.
Quick Startup Downloading from TFTP Server
Command
Details
transfer download mode TFTP
Makes the download mode to be TFTP
transfer download datatype <config/code>
Sets the download datatype to be an image or
config file.
The default is a code file.
config file.
The default is a code file.
transfer download filename <name>
The name can ONLY be an image file or a
configuration file of the switch.
configuration file of the switch.
transfer download serverip <ipAddr>
The IP Address is the source IP Address.
transfer download start
Starts the TFTP download
Table 6-8.
Quick Startup Factory Defaults
Command
Details
clear config
Enter yes when the prompt pops up to clear all the configurations
made to the switch.
made to the switch.
save config
Enter yes when the prompt pops up that asks if you want to save the
configurations made to the switch.
configurations made to the switch.
reset system OR Cold Boot the
Switch
Switch
Enter yes when the prompt pops up that asks if you want to reset the
system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.
system.
This is the users choice either reset the switch or cold boot the
switch, both work effectively.