Netgear gsm7312 사용자 설명서

7-4

Switching Commands

The port which this address was learned.

This object indicates the ifIndex of the interface table entry associated with this 
port.

The status of this entry. The meanings of the values are:

Static - The value of the corresponding instance was added by the system or a 
user and cannot be relearned.

Learned - The value of the corresponding instance was learned, and is being 
used.

Management - The value of the corresponding instance is also the value of an 
existing instance of dot1d Static Address. Currently this is used when enabling 
VLANs for routing.

Self - The value of the corresponding instance is the system’s own MAC 
address.

GMRP Learned - The value of the corresponding instance was learned via 
GMRP.

Other - The value of the corresponding instance does not fall into one of the 
other categories.

This command displays the forwarding database entries for learned addresses. If the command is entered 
with no parameter, all learned addresses are displayed. This is the same as entering the optional 

parameter. Alternatively, the administrator can enter a VLAN and MAC Address to display the table entry 
for the requested MAC address and all learned entries following the requested MAC address.

 learned[vlanplusmacaddr/all]

A unicast MAC address for which the switch has forwarding and or filtering 
information. The format is 6 or 8 two-digit hexadecimal numbers that are 
separated by colons, for example, 01:23:45:67:89:AB. In an IVL system the 
MAC address will be displayed as 8 bytes. In an SVL system, the MAC address 
will be displayed as 6 bytes.

The port which this address was learned.

This object indicates the ifIndex of the interface table entry associated with this 
port.

The status of this entry. This value will always be Learned.

This command displays detailed statistics for a specific port.

<slot.port>