Netgear gsm7312 사용자 설명서

Switching Commands

7-19

This command activates or deactivates an SNMP community. If a community is enabled, an 
SNMP manager associated with this community manages the switch according to its access right. 
If the community is disabled, no SNMP requests using this community are accepted. In this case 
the SNMP manager associated with this community cannot manage the switch until the Status is 
changed back to Enable.

The default private and public communities are enabled by default. The four 
undefined communities are disabled by default.

This command displays SNMP trap receivers. Trap messages are sent across a network to an 
SNMP Network Manager. These messages alert the manager to events occurring within the switch 
or on the network. Six trap receivers are simultaneously supported.

The community string of the SNMP trap packet sent to the trap manager. This 
may be up to 16 alphanumeric characters. This string is case sensitive. 

The IP address to receive SNMP traps from this device. Enter 4 numbers 
between 0 and 255 separated by periods. 

A pull down menu that indicates the receiver's status(enabled or disabled) and 
allows the administrator/user to perform actions on this user entry: 
Enable - send traps to the receiver. 
Disable - do not send traps to the receiver. 
Delete - remove the table entry. 

This command adds an SNMP trap name. The maximum length of name is 16 case-sensitive 
alphanumeric characters.

The default name for the six undefined community names is Delete.

This command deletes trap receivers for a community.