Netgear FVL328 참조 매뉴얼

7-8

Managing Your Network

The FVL328 provides remote management access and a variety of status and usage information 
which is discussed below. 

Using the Remote Management page, you can allow a user or users on the Internet to configure, 
upgrade and check the status of your FVL328 Prosafe High Speed VPN Firewall.

1.

Log in to the firewall at its default LAN address of 

 with its default user 

name of 

, default password of 

, or using whatever password and LAN address 

you have chosen for the firewall.

2.

In the Advanced section on the left navigator, select Remote Management.

3.

Select the Turn Remote Management On check box.

4.

Specify what external addresses will be allowed to access the firewall’s remote management.

 

 
Note: For security reasons, restrict access to as few external IP addresses as practical.

a.

To allow access from any IP address on the Internet, select Everyone. 

b.

To allow access from a range of IP addresses on the Internet, select IP address range.

 

Enter a beginning and ending IP address to define the allowed range. 

c.

To allow access from a single IP address on the Internet, select Only this PC.

 

Enter the IP address that will be allowed access. 

5.

Specify the Port Number that will be used for accessing the management interface.

Web browser access normally uses the standard HTTP service port 80. For greater security, 
you can change the remote management Web interface to a custom port by entering that 
number in the box provided. Choose a number between 1024 and 65535, but do not use the 
number of any common service port. The default is 8080, which is a common alternate for 
HTTP.

Be sure to change the router's default password to a very secure password. The 

ideal password should contain no dictionary words from any language, and should be a 
mixture of letters (both upper and lower case), numbers, and symbols. Your password 
can be up to 30 characters.