Netgear FVL328 참조 매뉴얼

7-20

Managing Your Network

•

Perform a DNS Lookup to test if an Internet name resolves to an IP address to verify that the 
DNS server configuration is working.

•

Display the Routing Table to identify what other routers the router is communicating with.

•

Reboot the Router to enable new network configurations to take effect or to clear problems 
with the router’s network connection.

Rebooting will break any existing connections either to the Router (such as this one) or 
through the Router (for example, LAN users accessing the Internet). However, connections to 
the Internet will automatically be re-established when possible.

The software of the FVL328 Firewall is stored in FLASH memory, and can be upgraded as new 
software is released by NETGEAR. Upgrade files can be downloaded from the NETGEAR Web 
site. If the upgrade file is compressed (.ZIP file), you must first extract the binary (.BIN or .IMG) 
file before uploading it to the firewall. 

The Web browser used to upload new firmware into the firewall must support HTTP uploads. Use 
Microsoft Internet Explorer 5.0 or above, or Netscape Navigator 4.7 or above. 

1.

Download and unzip the new software file from NETGEAR. 

2.

Log in to the firewall at its default LAN address of

 with its default user 

name of 

, default password of 

, or using whatever password and LAN address 

you have chosen for the firewall.

3.

From the main menu of the browser interface, under the Maintenance heading, select the 
Router Upgrade heading to display the menu shown in 

. 

Note: Product updates are available on the NETGEAR, Inc. Web site at 

. Documentation updates are available on the 

NETGEAR, Inc. Web site at 

.