Netgear FVL328 참조 매뉴얼
Model FVL328 ProSafe High-Speed VPN Firewall Reference Manual Revision 2
Preparing Your Network
C-7
May 2004, 202-10030-02
3.
From the components list, select TCP/IP->(your Ethernet adapter) and click Properties.
4.
In the IP Address tab, select “Obtain an IP address automatically”.
5.
Select the Gateway tab.
6.
If any gateways are shown, remove them.
7.
Click OK.
8.
Restart the PC.
Repeat steps 2 through 8 for each PC on your network.
Selecting Windows’ Internet Access Method
1.
On the Windows taskbar, click the Start button, point to Settings, and then click Control Panel.
2.
Double-click the Internet Options icon.
3.
Select “I want to set up my Internet connection manually” or “I want to connect through a
Local Area Network” and click Next.
Local Area Network” and click Next.
4.
Select “I want to connect through a Local Area Network” and click Next.
5.
Uncheck all boxes in the LAN Internet Configuration screen and click Next.
6.
Proceed to the end of the Wizard.
Verifying TCP/IP Properties
After your PC is configured and has rebooted, you can check the TCP/IP configuration using the
utility winipcfg.exe:
utility winipcfg.exe:
1.
On the Windows taskbar, click the Start button, and then click Run.
2.
Type
winipcfg
, and then click OK.
The IP Configuration window opens, which lists (among other things), your IP address, subnet
mask, and default gateway.
mask, and default gateway.
3.
From the drop-down box, select your Ethernet adapter.
The window is updated to show your settings, which should match the values below if you are
using the default TCP/IP settings that NETGEAR recommends:
using the default TCP/IP settings that NETGEAR recommends:
•
The IP address is between 192.168.0.2 and 192.168.0.254
•
The subnet mask is 255.255.255.0