Netgear FVS328 참조 매뉴얼

Managing Your Network

8-13

It is sometimes desirable to restore the firewall to the factory default settings. This can be done by 
using the Erase function. 

1.

To erase the configuration, from the Settings Backup menu, click the Erase button under 
Revert to factory default settings.

2.

The firewall will then reboot automatically.

After an erase, the firewall's password will be password, the LAN IP address will be 
192.168.0.1, and the router's DHCP client will be enabled.

Note: To restore the factory default configuration settings without knowing the login password 
or IP address, you must use the Default Reset button on the rear panel of the firewall. See 

The FVS328 Firewall has a diagnostics feature. You can use the diagnostics menu to perform the 
following functions from the firewall:

•

Ping an IP Address to test connectivity to see if you can reach a remote host.

•

Perform a DNS Lookup to test if an Internet name resolves to an IP address to verify that the 
DNS server configuration is working.

•

Display the Routing Table to identify what other routers the router is communicating with.

•

Reboot the Router to enable new network configurations to take effect or to clear problems 
with the router’s network connection.

From the main menu of the browser interface, under the Maintenance heading, select the 
Diagnostics link to display the menu shown below. Then select the function you want to activate.