Netgear FVS328 참조 매뉴얼

NETGEAR VPN Configuration FVS318 or FVM318 to FVS328

F-1

This appendix provides a case study on how to configure a secure IPSec VPN tunnel between a 
NETGEAR FVS318 or FVM318 to a FVS328. The configuration options and screens for the 
FVS318 and FVM318 are the same.

The configuration in this document follows the addressing and configuration mechanics defined 
by the VPN Consortium. Gather all the necessary information before you begin the configuration 
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and 
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.

VPN Consortium Scenario:

Scenario 1

Type of VPN 

LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)

Security Scheme:

IKE with Preshared Secret/Key (not Certificate-based)

Date Tested:

December 2003

Model/Firmware Tested:

NETGEAR-Gateway A

FVS318 firmware version A1.4 or 2.0; FVM318 firmware version 1.1

NETGEAR-Gateway B

FVS328 with firmware version 1.0 Release 00

IP Addressing:

NETGEAR-Gateway A

Static IP address

NETGEAR-Gateway B

Static IP address