Netgear FVS328 참조 매뉴얼
NETGEAR VPN Configuration FVS318 or FVM318 with FQDN to FVS328
G-1
May 2004, 202-10031-01
Appendix G
NETGEAR VPN Configuration
FVS318 or FVM318 with FQDN to FVS328
This appendix provides a case study on how to configure a VPN tunnel between a NETGEAR
FVS318 or FVM318 to a FVS328 using a Fully Qualified Domain Name (FQDN) to resolve the
public address of one or both routers. The configurations screens and settings for the FVS318 and
FVM318 are the same.
FVS318 or FVM318 to a FVS328 using a Fully Qualified Domain Name (FQDN) to resolve the
public address of one or both routers. The configurations screens and settings for the FVS318 and
FVM318 are the same.
Configuration Profile
The configuration in this document follows the addressing and configuration mechanics defined
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
by the VPN Consortium. Gather all the necessary information before you begin the configuration
process. Verify whether the firmware is up to date, all of the addresses that will be necessary, and
all of the parameters that need to be set on both sides. Check that there are no firewall restrictions.
Table G-1.
Summary
VPN Consortium Scenario:
Scenario 1
Type of VPN
LAN-to-LAN or Gateway-to-Gateway (not PC/Client-to-Gateway)
Security Scheme:
IKE with Preshared Secret/Key (not Certificate-based)
Date Tested:
December 2003
Model/Firmware Tested:
NETGEAR-Gateway A
FVS318 firmware version A1.4 or 2.0; FVM318 firmware version 1.1
NETGEAR-Gateway B
FVS328 with firmware version 1.0 Release 00
IP Addressing:
NETGEAR-Gateway A
Fully Qualified Domain Name (FQDN)
NETGEAR-Gateway B
Static IP address