Netgear FVS328 참조 매뉴얼
Model FVS328 ProSafe VPN Firewall with Dial Back-up Reference Manual
NETGEAR VPN Client to NETGEAR the FVS328
H-15
May 2004, 202-10031-01
To test the connection to a computer connected to the FVS328, simply ping the IP address of
that computer.
that computer.
Once connected, you can open a browser on the remote PC and enter the LAN IP Address of the
FVS328, which is http://192.168.0.1 in this example. After a short wait, you should see the login
screen of the FVS328.
FVS328, which is http://192.168.0.1 in this example. After a short wait, you should see the login
screen of the FVS328.
From the FVS328 to the Client PC
You can use the FVS328 Diagnostic utilities to test the VPN connection from the FVS328 to the
client PC. Run ping tests from the Diagnostics link of the FVS328 main menu.
client PC. Run ping tests from the Diagnostics link of the FVS328 main menu.
Monitoring the PC VPN Connection
Information on the progress and status of the VPN client connection can be viewed by opening the
Netgear ProSafe VPN Client Connection Monitor or Log Viewer. To launch these functions, click
on the Windows Start button, then select Programs, then Netgear ProSafe VPN Client, then either
the Connection Monitor or Log Viewer.
Netgear ProSafe VPN Client Connection Monitor or Log Viewer. To launch these functions, click
on the Windows Start button, then select Programs, then Netgear ProSafe VPN Client, then either
the Connection Monitor or Log Viewer.
The Log Viewer screen for a successful connection is shown below:
Figure H-13: Log Viewer screen