Netgear FVS328 참조 매뉴얼

4-6

Serial Port Configuration

LAN-to-LAN enables direct communications between two FVS328 firewalls.

Serial port LAN-to-LAN configurations require these elements:

1.

An ISDN or analog phone line with an active ISDN or dial-up ISP account.

2.

A serial modem properly configured and attached to the DB9 connector on the serial port. 

3.

A broadband connection to one FVS328 for LAN-to-LAN auto-rollover Internet access.

4.

The LAN-to-LAN settings configured and applied to the two FVS328 firewalls. 

Follow the steps below to configure a serial port LAN-to-LAN connection.

1.

Configure a serial port modem according to the instructions above.

2.

From the main menu, click LAN-to-LAN in the Serial Port section. 

Serial Connection