Netgear FVS328 참조 매뉴얼

WAN and LAN Configuration

5-7

1.

Log in to the firewall at its default LAN address of

 with its default user 

name of 

, default password of 

, or using whatever password and LAN address 

you have chosen for the firewall.

2.

From the Main Menu of the browser interface, under Advanced, click Dynamic DNS. 

3.

Click the radio button for the dynamic DNS service you will use. Access the Web site of the 
dynamic DNS service providers whose, and register for an account.

 

For example, for TZO.com, go to 

.

4.

Click Apply to save your configuration. 

5.

Click Status to see the login in progress.

Static Routes provide additional routing information to your firewall. Under normal 
circumstances, the firewall has adequate routing information after it has been configured for 
Internet access, and you do not need to configure additional static routes. You must configure 
static routes only for unusual cases such as multiple routers or multiple IP subnets located on your 
network.

As an example of when a static route is needed, consider the following case:

•

Your primary Internet access is through a cable modem to an ISP.

•

You have an ISDN router on your home network for connecting to the company where 
you are employed. This router’s address on your LAN is 192.168.0.100.

•

Your company’s network is 134.177.0.0.

If your ISP assigns a private WAN IP address such as 192.168.x.x or 10.x.x.x, the 

dynamic DNS service will not work because private addresses will not be routed on the 
Internet.