Netgear FVS328 참조 매뉴얼
Protecting Your Network
6-1
May 2004, 202-10031-01
Chapter 6
Protecting Your Network
This chapter describes how to use the basic firewall features of the FVS328 ProSafe VPN Firewall
with Dial Back-up to protect your network.
with Dial Back-up to protect your network.
Protecting Access to Your FVS328 Firewall
For security reasons, the firewall has its own user name and password. Also, after a period of
inactivity for a set length of time, the administrator login will automatically disconnect. You can
use the procedures below to change the firewall's password and the amount of time for the
administrator’s login timeout.
inactivity for a set length of time, the administrator login will automatically disconnect. You can
use the procedures below to change the firewall's password and the amount of time for the
administrator’s login timeout.
Note:
The user name and password are not the same as any user name or password your may use
to log in to your Internet connection.
NETGEAR recommends that you change this password to a more secure password. The ideal
password should contain no dictionary words from any language, and should be a mixture of both
upper and lower case letters, numbers, and symbols. Your password can be up to 30 characters.
password should contain no dictionary words from any language, and should be a mixture of both
upper and lower case letters, numbers, and symbols. Your password can be up to 30 characters.
How to Change the Built-In Password
1.
Log in to the firewall at its default LAN address of
http://192.168.0.1
with its default User
Name of
admin
, default password of
password
, or using whatever password and LAN
address you have chosen for the firewall.
2.
From the main menu of the browser interface, under the Maintenance heading, select Set
Password to bring up the menu shown below.
Password to bring up the menu shown below.