Netgear RT338 참조 가이드
Configuring Dial-In Access
8-1
Chapter 8
Configuring Dial-In Access
You can configure the Model RT338 ISDN Router to receive calls from remote dial-in users (for
example, telecommuters) and remote nodes. There are several differences between remote dial-in
users and remote nodes:
example, telecommuters) and remote nodes. There are several differences between remote dial-in
users and remote nodes:
•
The router can make calls to or answer calls from the remote node, but the remote dial-in user
calls are incoming or callback only.
calls are incoming or callback only.
•
Each remote node can have its own set of parameters such as bandwidth on demand, protocol,
and security; however, all remote dial-in users share one common set, as defined in the Default
Dial In Setup (Menu 13).
and security; however, all remote dial-in users share one common set, as defined in the Default
Dial In Setup (Menu 13).
•
Typically, remote dial-in users are individual users who dial in to the router directly from their
workstations; and remote nodes represent networks and are used for LAN-to-LAN
connections.
workstations; and remote nodes represent networks and are used for LAN-to-LAN
connections.
This chapter discusses how to set up default dial-in parameters for both a remote node and a
remote dial-in user.
remote dial-in user.