Adtran 4305 설치 설명서
NetVanta 4305 Hardware Installation Guide
Unit Installation
61200890L1-34H
Copyright © 2006 ADTRAN, Inc.
41
4.
UNIT INSTALLATION
The instructions and guidelines provided in this section cover hardware installation topics such as wall
mounting/rack mounting the unit and installing option cards. These instructions are presented as follows:
mounting/rack mounting the unit and installing option cards. These instructions are presented as follows:
•
•
•
•
For information on router configuration for a specific application, refer to the quick start documents
provided on your ADTRAN OS System Documentation CD. For details on the command line interface,
refer to the AOS Command Reference Guide (also included on your CD).
provided on your ADTRAN OS System Documentation CD. For details on the command line interface,
refer to the AOS Command Reference Guide (also included on your CD).
Tools Required
The following customer-provided tools are required for the hardware installation of the NetVanta 4305:
•
Ethernet cable
•
Network cable (module dependent)
•
DSX-1 cable (T1/FT1 + DSX-1 module only)
•
G.703 cable (E1/FE1 + G.703 module only)
•
DBU cable (dial backup functions require an optional DIM)
•
Phillips-head screwdriver (rack mounted applications only)
To prevent electrical shock, do not install equipment in a wet location or during an
electrical storm.
electrical storm.
Electronic modules can be damaged by static electrical discharge. Before handling
modules, wear an antistatic discharge wrist strap to prevent damage to electrical
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
modules, wear an antistatic discharge wrist strap to prevent damage to electrical
components. Place modules in antistatic packing material when transporting or storing.
When working on modules, always place them on an approved antistatic mat that is
electrically grounded.
To access the command line interface (CLI) of the NetVanta 4305, you will also need a
VT100 terminal or PC with terminal emulation software and a console port cable.
Instructions on how to access the CLI are given in the AOS Command Reference Guide
(provided on the ADTRAN OS System Documentation CD).
VT100 terminal or PC with terminal emulation software and a console port cable.
Instructions on how to access the CLI are given in the AOS Command Reference Guide
(provided on the ADTRAN OS System Documentation CD).