Netgear DG834PN 참조 가이드

TM

Advanced Configuration

6-3

Normally, this option should be enabled, so that an Internet connection will be made automatically, 
whenever Internet-bound traffic is detected. If this causes high connection costs, you can disable 
this setting. 

If disabled, you must connect manually, using the sub-screen accessed from the "Connection 
Status" button on the Status screen.

If you have an "Always on" connection, this setting has no effect.

The Firewall protects your LAN against Port Scans and Denial of Service (DOS) attacks. This 
should be disabled only in special circumstances.

If you want the ADSL modem wireless router to respond to a 'ping' from the Internet, select the 
‘Respond to Ping on Internet WAN Port’ check box. This should only be used as a diagnostic tool, 
since it allows your ADSL modem wireless router to be discovered. Do not select this box unless 
you have a specific reason to do so.

The normal MTU (Maximum Transmit Unit) value for most Ethernet networks is 1500 Bytes, or 
1492 Bytes for PPPoE connections. For some ISPs you may need to reduce the MTU. But this is 
rarely required, and should not be done unless you are sure it is necessary for your ISP connection.

The LAN IP Setup menu allows configuration of LAN IP services such as DHCP and RIP. These 
features can be found under the Advanced heading in the Main Menu of the browser interface.

The ADSL modem wireless router is shipped preconfigured to use private IP addresses on the 
LAN side, and to act as a DHCP server. The ADSL modem wireless router’s default LAN IP 
configuration is:

•

LAN IP addresses—192.168.0.1

•

Subnet mask—255.255.255.0