Netgear DG824M 참조 매뉴얼

Connecting the Gateway to the Internet

3-5

This section provides instructions for connecting the DG824M wireless gateway.

The Resource CD included with your gateway contains an animated Installation Assistant to 

help you through this procedure.

There are three steps to connecting your firewall:

1.

Connect the gateway to your ADSL line 

2.

Connect the gateway to the computers on your network

3.

Log in to the gateway

4.

Connect to the Internet

Follow the steps below to connect your gateway to your network. You can also refer to the 
Resource CD included with your gateway which contains an animated Installation Assistant to 
help you through this procedure.

Before you begin, locate the ADSL configuration information from your Internet Service Provider 
(ISP). 

a.

You need to install a filter on every telephone or device that shares the same phone 
number as your ADSL gateway. Select the filter that came with your gateway. 

Note: If you purchased the DG824M in a country where the filter is not included, you 
must acquire one. 

One-Line Filter

Two-Line Filter

Splitter

With Splitter