Netgear fvm318 설치 가이드
Technical Support
PLEASE REFER TO THE SUPPORT INFORMATION CARD THAT SHIPPED
WITH YOUR PRODUCT.
WITH YOUR PRODUCT.
By registering your product at www.NETGEAR.com/register, we can
provide you with faster expert technical support and timely notices of product and
software upgrades.
provide you with faster expert technical support and timely notices of product and
software upgrades.
NETGEAR, INC.
Support Information
Phone: 1-888-NETGEAR (For US & Canada only)
For other countries see your Support information card.
E-mail: Support@NETGEAR.com
Website: www.NETGEAR.com
©2002 by NETGEAR, Inc. All rights reserved.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in
the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective
holders.
Information is subject to change without notice.
NETGEAR and Auto Uplink are trademarks or registered trademarks of NETGEAR, Inc. in
the United States and/or other countries.
Other brand and product names are trademarks or registered trademarks of their respective
holders.
Information is subject to change without notice.
October 2002
Statement of Conditions
In the interest of improving internal design, operational function, and/ or reliability,
NETGEAR reserves the right to make changes to the products described in this document
without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the
product(s) or circuit layout(s) described herein.
without notice.
NETGEAR does not assume any liability that may occur due to the use or application of the
product(s) or circuit layout(s) described herein.
Federal Communications Commission (FCC) Compliance
Notice: Radio Frequency Notice
Notice: Radio Frequency Notice
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
receiver is connected.
•
Consult the dealer or an experienced radio/ TV technician for help.
Federal Communications Commission (FCC) Radiation
Exposure Statement
Exposure Statement
This equiment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. In order to avoid the possibility of exceeding the FCC radio frequency expo-
sure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during
normal operation.
environment. In order to avoid the possibility of exceeding the FCC radio frequency expo-
sure limits, human proximity to the antenna shall not be less than 20 cm (8 inches) during
normal operation.
EN 55 022 Declaration of Conformance
This is to certify that the Model FVM318 Cable/DSL ProSafe Wireless VPN Security
Firewall is shielded against the generation of radio interference in accordance with the
application of Council Directive 89/ 336/ EEC, Article 4a. Conformity is declared by the
application of EN 55 022 Class B (CISPR 22).
Firewall is shielded against the generation of radio interference in accordance with the
application of Council Directive 89/ 336/ EEC, Article 4a. Conformity is declared by the
application of EN 55 022 Class B (CISPR 22).
Canadian Department of Communications Radio Interference
Regulations
Regulations
This digital apparatus (Model FVM318 ProSafe Wireless VPN Security Firewall) does not
exceed the Class B limits for radio-noise emissions from digital apparatus as set out in the
Radio Interference Regulations of the Canadian Department of Communications.
Radio Interference Regulations of the Canadian Department of Communications.
Règlement sur le brouillage radioélectrique du ministère
des Communications
des Communications
Cet appareil numérique (Model FVM318 ProSafe Wireless VPN Security Firewall) respecte
les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites
dans le èglement sur le brouillage radioélectrique du ministère des Communications du
Canada.
les limites de bruits radioélectriques visant les appareils numériques de classe B prescrites
dans le èglement sur le brouillage radioélectrique du ministère des Communications du
Canada.
Bestätigung des Herstellers/ Importeurs
Es wird hiermit bestätigt, daß das Model FVM318 Cable/DSL ProSafe Wireless VPN
Security Firewall gemäß der im BMPT- AmtsblVfg 243/ 1991 und Vfg 46/ 1992
aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte
(z. B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. LesenSie dazu bitte
die Anmerkungen in der Betriebsanleitung.
Security Firewall gemäß der im BMPT- AmtsblVfg 243/ 1991 und Vfg 46/ 1992
aufgeführten Bestimmungen entstört ist. Das vorschriftsmäßige Betreiben einiger Geräte
(z. B. Testsender) kann jedoch gewissen Beschränkungen unterliegen. LesenSie dazu bitte
die Anmerkungen in der Betriebsanleitung.
Das Bundesamt für Zulassungen in der Telekommunikation wurde davon unterrichtet, daß
dieses Gerät auf den Markt gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung
der Vorschriften hin zu überprüfen.
dieses Gerät auf den Markt gebracht wurde und es ist berechtigt, die Serie auf die Erfüllung
der Vorschriften hin zu überprüfen.
Certificate of the Manufacturer/ Importer
It is hereby certified that the Model FVM318 Cable/DSL ProSafe Wireless VPN Security
Firewall has been suppressed in accordance with the conditions set out in the BMPT-
AmtsblVfg 243/ 1991 and Vfg 46/ 1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain
restrictions. Please refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this
equipment on the market and has been granted the right to test the series for compliance
with the regulations.
Firewall has been suppressed in accordance with the conditions set out in the BMPT-
AmtsblVfg 243/ 1991 and Vfg 46/ 1992. The operation of some equipment (for example,
test transmitters) in accordance with the regulations may, however, be subject to certain
restrictions. Please refer to the notes in the operating instructions.
Federal Office for Telecommunications Approvals has been notified of the placing of this
equipment on the market and has been granted the right to test the series for compliance
with the regulations.
Voluntary Control Council for Interference (VCCI) Statement
This equipment is in the second category (information equipment to be used in a residential
area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control
Council for Interference by Data Processing Equipment and Electronic Office Machines
aimed at preventing radio interference in such residential areas.
area or an adjacent area thereto) and conforms to the standards set by the Voluntary Control
Council for Interference by Data Processing Equipment and Electronic Office Machines
aimed at preventing radio interference in such residential areas.
When used near a radio or TV receiver, it may become the cause of radio interference.
Read instructions for correct handling.
*M1-FVM318NA-0*
M 1 - F V M 3 1 8 N A - 0