Netgear DGN2200M 사용자 설명서
Technical Specifications and Factory Default Settings
112
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition
Factory Default Configuration
You can use the Restore Factory Settings button on the bottom panel of your router to restore
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
Table 15. Factory default settings
Feature
Default behavior
Router login
User login URL
User name (case-sensitive)
admin
Login password (case-sensitive)
password
Internet
connection
connection
WAN MAC address
Use default address
WAN MTU size
1492
Port speed
Autosensing
Local network
(LAN)
(LAN)
LAN IP
192.168.0.1
Subnet mask
255.255.255.0
RIP direction
None
RIP version
Disabled
RIP authentication
None
DHCP server
Enabled
DHCP starting IP address
192.168.0.2
DHCP ending IP address
192.168.0.254
DMZ
Enabled or disabled
Time zone
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
for NA
Time zone adjusted for daylight
savings time
savings time
Disabled
SNMP
Disabled
Firewall
Inbound (communications coming
in from the Internet)
in from the Internet)
Disabled (except traffic on port 80, the HTTP port)
Outbound (communications going
out to the Internet)
out to the Internet)
Enabled (all)
Source MAC filtering
Disabled