Netgear DGN2200M 사용자 설명서

Wireless Settings Screen Fields

The primary network is the one that you usually use. You can set up guest networks too. You 
can customize access so that people who use their computers to access your guest network 
can use the Internet, but they do not have access to the rest of your home network. 

Name (SSID). The SSID is also known as the wireless network name. Enter a 

32-character (maximum) name in this field. This field is case-sensitive. The default SSID 
for your primary network is randomly generated, and there is typically no need to change 
it. If you want to set up guest networks, NETGEAR does recommend that you customize 
the default guest network names (SSIDs).

Region. The location where the wireless modem router is used. It might not be legal to 

operate the wireless modem router in a region other than the regions listed.

Channel. The wireless channel used by the gateway: 1 through 13. Do not change the 

channel unless you experience interference (shown by lost connections or slow data 
transfers). If this happens, experiment with different channels to see which is the best.

Mode. Up to 150 Mbps is the default and allows 802.11n and 802.11g wireless devices to 

join the network. g & b supports up to 54 Mbps. Up to 65 Mbps supports up to 65 Mbps.

Enable this wireless network. When this check box is selected, the wireless modem 

router accepts wireless clients for the network. By default, this check box is selected for 
your primary network. If you clear this check box, the wireless modem router accepts 
wired clients only.

Allow Broadcast of Name (SSID). This setting allows the wireless modem router to 

broadcast its SSID so that a wireless station can display this wireless name (SSID) in its 
scanned network list. This check box is selected by default. To turn off the SSID 
broadcast, clear the Allow Broadcast of Name (SSID) check box and click Apply.

Wireless Isolation. When this check box is selected, wireless stations cannot 

communicate with each other or with stations on the wired network. By default, this check 
box is not selected.

The Security Options section of the Wireless Settings screen lets you change the security 
option and passphrase. The primary network for your preset wireless modem router is 
already set up with WPA2 and WPA security. NETGEAR recommends that you set up 
wireless security for each guest network that you plan to use. For information about changing 
these settings, see the following section, 

38.