Netgear DGN2200M 사용자 설명서

Set Your Time Zone



In the Schedule screen, select your time zone. 

This setting is used for the blocking schedule according to your local time zone and for 
time-stamping log entries.

If your time zone is currently in daylight savings time, select the Adjust for Daylight 
Savings Time check box.

If your region uses daylight savings time, you need to manually 

select Adjust for Daylight Savings Time on the first day of daylight 
savings time, and clear it at the end. Enabling daylight savings time 
causes 1 hour to be added to the standard time.

The wireless modem router has a list of NETGEAR NTP servers. If you would prefer to use 
a particular NTP server as the primary server, select the Use this NTP Server check box, 
and enter its IP address.

Click Apply to save your settings.

Schedule Firewall Services

If you enabled service blocking in the Block Services screen or port forwarding in the Port 
Forwarding/Port Triggering screen, you can set up a schedule for when blocking occurs or 
when access is not restricted. 



From the Schedule screen, select Every Day, or select one or more days. 

If you want to limit access completely for the selected days, select All Day. Otherwise, to 
limit access during certain times for the selected days, or enter times in the Start Time and 
End Time fields.

Enter the values in 24-hour time format. For example, 10:30 a.m. 

would be 10

 

hours and 30 minutes, and 10:30 p.m. would be 22 

hours and 30 minutes. If you set the start time after the end time, the 
schedule will be effective through midnight the next day.

Click Apply to save your changes.