Netgear DGN2200M 사용자 설명서

You can type in the MAC address for the wireless computer or device. The MAC 

address is usually printed on the wireless card, or on the label of a wireless device. It 
might appear in the wireless modem router’s DHCP table. The MAC address is 
12

 

hexadecimal digits.

You can copy and paste the MAC addresses from the wireless modem router’s 

Attached Devices screen into the MAC Address field of this screen. To do this, 
configure each wireless computer to obtain a wireless link to the wireless modem 
router. The computer should then appear in the Attached Devices screen.

Click Add to add each entry. You can add several stations to the list.

When you are finished adding stations, click Apply.

Now, only computers and devices on this list can wirelessly connect to the wireless modem 
router. This prevents unauthorized access to your network. 

Configure WPS Settings

The advanced WPS settings cannot be displayed if you have selected WEP as the security 
option. 



In the main menu, under Advanced, select Wireless Settings to display the Advanced 
Wireless Settings screen:

By default the Enable WPS check box is selected. If you clear this check box and click 
Apply, you will not be able to use WPS.

Under WPS Settings, you can configure the following settings: