Netgear DGND3700 사용자 가이드

Add Clients (Devices) to Your Network

Choose either the manual or the WPS method to add wireless devices, including guest 
devices, and other equipment to your wireless network.

Manual Method



Open the software that manages your wireless connections on the wireless device 
(laptop computer, gaming device, iPhone) that you want to connect to your router. This 
software scans for all wireless networks in your area.

Look for your network and select it. If you did not change the name of your network during 
the setup process, look for the default Wi-Fi network name (SSID) and select it. The default 
Wi-Fi network name (SSID) is located on the product label on the bottom of the router.

Enter the wireless modem router passphrase and click Connect. The default wireless 
modem router passphrase is located on the product label on the bottom of the router.

Repeat steps 1–3 to add other wireless devices.

Wi-Fi Protected Setup (WPS) Method

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to 
a home network while maintaining security. To use WPS, make sure that all wireless devices 
to be connected to the network are Wi-Fi certified and support WPS. During the connection 
process, the client gets the security settings from the router so that every device in the 
network has the same security settings. 

However, if you find that the router is generating new security 

settings for each added device, it means that the default value for 
Keep Existing Wireless Settings has changed. See 

page 131 for more information about this setting.

All Wi-Fi-certified and WPS-capable products are compatible with the NETGEAR products 
that have Push 'N' Connect, which is based on WPS.

1

 For information about how to view a 

list of all wireless and wired devices connected to your modem router, see 

on page 72.

WEP security does not support WPS. If you try to use WPS to 

connect a WEP device to your network, it will not connect.