Netgear fwag114 참조 매뉴얼
Reference Manual for the ProSafe Dual Band Wireless VPN Firewall FWAG114
Maintenance
6-5
Viewing a List of Attached Devices
The Attached Devices menu contains a table of all IP devices that the router has discovered on the
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
local network. From the Main Menu of the browser interface, under the Maintenance heading,
select Attached Devices to view the table, shown below.
Figure 6-4: Attached Devices menu
For each device, the table shows the IP address, NetBIOS Host Name (if available), and Ethernet
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.
MAC address. Note that if the router is rebooted, the table data is lost until the router rediscovers
the devices. To force the router to look for attached devices, click the Refresh button.
Upgrading the Router Software
The routing software of the FWAG114 wireless firewall is stored in FLASH memory, and can be
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.TRX) file before sending it to the router. The upgrade file can be sent to the router using your
browser.
upgraded as new software is released by NETGEAR. Upgrade files can be downloaded from
Netgear's website. If the upgrade file is compressed (.ZIP file), you must first extract the binary
(.TRX) file before sending it to the router. The upgrade file can be sent to the router using your
browser.
Table 6-2.
Connection Status action buttons
Field
Description
Set Interval
Enter a time and click the button to set the polling frequency.
Stop
Click the Stop button to freeze the polling information.