Netgear DGND3700 빠른 설정 가이드

©2011 by NETGEAR, Inc. All rights reserved. NETGEAR and the NETGEAR logo are registered trademarks of 

NETGEAR, Inc. in the United States and/or other countries. Other brand and product names are trademarks or 

registered trademarks of their respective holders. Information is subject to change without notice. 

This symbol was placed in accordance with the European Union Directive 2002/96 on the Waste 

Electrical and Electronic Equipment (the WEEE Directive). If disposed of within the European Union, 

this product should be treated and recycled in accordance with the laws of your jurisdiction 

implementing the WEEE Directive.

Open a Web browser, type http://www.routerlogin.net, and click Enter. 

Enter the router user name admin and 
default password password. Click OK.

When the main settings screen opens, 
you are asked if you want to check for an 
update. Click Cancel. You can always 
check for new firmware later after you are 
connected to the Internet. 

Select the first menu item on the left: Setup Wizard. Make sure Yes is 
selected. Then click Next and follow the prompts to complete the Setup Wizard 
and be connected to the Internet.

Note for DSL users: If your DSL ISP requires that you enter a user name or 
password, you are prompted to enter this information. If you do not have this 
information, contact your DSL ISP. 
If using DSL, record your information here:
DSL User Name 

______________________________________________

DSL Password 

_______________________________________________

After connecting to the Internet, check for firmware updates by selecting Router 
Upgrade and following the on-screen prompts.

You should set up secure 2.4 GHz and 5 GHz wireless networks. Once your 
wireless security is established, your wireless laptops, gaming devices (such as 
Wii or Play Station 3 with wireless), and other wireless equipment can safely and 
securely connect to the Internet.

From the main menu, select Wireless Settings.* 

Name your wireless networks. Choose names (SSIDs) that are easy for you 

to remember (the default names are NETGEAR and NETGEAR-5G). 

Select a security method. NETGEAR recommends WPA2-PSK (AES).

Enter the passphrases. This example uses HomeNetwork1 and 
HomeNetwork2. 
Note: Your network names (SSIDs) and passphrases are case-sensitive. 
Your network name, security method, and passphrase must be the same for 
all the wireless devices connected to your router on a network.

Click Apply and close your browser.

*Your router menu might display different or additional 

features not shown in this image.

2.4 GHz wireless network setup

5 GHz wireless network setup

Names (SSIDs)

Security

Passphrasesgfd

 Record your wireless information here:
 2.4 GHz Wireless Network Name (SSID) _______________________
 2.4 GHz Wireless Security Passphrase _________________________
 5 GHz Wireless Network Name (SSID) _________________________
 5 GHz Wireless Security Passphrase ___________________________
 If you do not remember your passphrase, type http://www.routerlogin.net into your 
 browser and log in by entering the user name admin and the password (the default 
 is password). Then, select Wireless Settings to retrieve your passphrase.

You can add wireless computers and other equipment to your wireless network: 

Open the wireless software that manages your wireless connections on the 
wireless device (iPhone, laptop computer, gaming device) that you want to 
connect to your router. 

The wireless software scans for all wireless networks in your area. Look for your 

network—the one you named when you set up your router. Select it.

If you set up security, you are prompted for a passphrase or network key. Enter 

the passphrase you selected and click Connect. 

If your wireless device supports WPS (Wi-Fi Protected Setup)—NETGEAR calls this 
method Push 'N' Connect—you might be prompted to press the WPS button on the 
router instead of entering a passphrase. Then:

Press the WPS button on the router. It looks similar to 

.

Within 2 minutes, follow the wireless software instructions on the wireless device 

to complete the WPS process. 
The device will then be connected to your router. Repeat this process to add 
other wireless devices.

For complete DoC, visit the NETGEAR EU Declarations of Conformity website at: 

.

For GNU General Public License (GPL) related information, visit: