Netgear WGT634U 참조 매뉴얼

Connecting the Router to the Internet

3-1

This chapter describes how to set up the router on your local area network (LAN) and connect to 
the Internet. You will find out how to configure your 108 Mbps Wireless Media Router WGT634U 
for Internet access using the Setup Wizard, or how to manually configure your Internet connection.

You need to prepare these three things before you begin:

1.

Have active Internet service such as that provided by an cable or DSL broadband account.

2.

Locate the Internet Service Provider (ISP) configuration information for your DSL account. 

3.

Connect the router to a cable or DSL modem and a computer as explained below.

To use the WGT634U Wireless Media Router on your network, each computer must have an 
installed Ethernet Network Interface Card (NIC) and an Ethernet cable. If the computer will 
connect to your network at 100 Mbps, you must use a Category 5 (Cat 5) cable such as the one 
provided with your router. The cable or DSL broadband modem must provide a standard 10 Mbps 
(10BASE-T) or 100 Mbps (100BASE-Tx) Ethernet interface. 

The WGT634U includes a built-in Web Configuration Manager. To access the configuration 
menus on the WGT634U, you must use a Java-enabled Web browser program which supports 
HTTP uploads such as Microsoft Internet Explorer or Netscape Navigator. Use Internet Explorer 
or Netscape Navigator 4.0 or above. 

For the initial setup of your router, you will need to connect a computer to the router. This 
computer has to be set to automatically get its TCP/IP configuration from the router via DHCP.

For help with DHCP configuration, please use the Windows TCP/IP Configuration 

Tutorials on the 108 Mbps Wireless Media Router WGRT634U Resource CD (230-10043-02), or 
refer to 

.