Netgear WGT634U 참조 매뉴얼
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
4-12
Wireless Configuration
April 2004, 202-10018-02
How to Configure WEP Encryption
To configure WEP data encryption, follow these steps:
1.
Log in to the WGT634U router at its default LAN address of
http://192.168.1.1
with its default
user name of admin and default password of password, or using whatever LAN address and
password you have set up.
password you have set up.
2.
Click the Wireless Settings link in the Setup section of the main menu.
3.
Under Security Options, select WEP.
4.
From the Security Encryption menu drop-down list, select the WEP encryption strength you
will use.
will use.
Figure 4-7.
Wireless Settings encryption menu
5.
You can manually or automatically program the four data encryption keys. These values must
be identical on all computers and Access Points in your network.
be identical on all computers and Access Points in your network.
•
Automatic — enter a word or group of printable characters in the Passphrase box and click
the Generate button. The four key boxes will be automatically populated with key values.
the Generate button. The four key boxes will be automatically populated with key values.
•
Manual — enter ten hexadecimal digits (any combination of 0-9, a-f, or A-F)
Select which of the four keys will be active.
Please refer to
these options, as defined by the IEEE 802.11 wireless communication standard.
6.
Click Apply to save your settings.
Note:
If you use a wireless computer to configure the WEP settings, you will be
disconnected when you click Apply. You must then either configure your wireless
adapter to match the wireless router WEP settings or access the wireless router from a
wired computer to make any further changes.
adapter to match the wireless router WEP settings or access the wireless router from a
wired computer to make any further changes.