Netgear WGT634U 참조 매뉴얼

다운로드
페이지 180
Reference Manual for the 108 Mbps Wireless Media Router WGT634U
Connecting a USB Drive to the Router
5-7
April 2004, 202-10018-02
USB Drive Requirements
The WGT634U Wireless Media Router conforms to the USB 1.0 and 1.1 (USB Full Speed) and 
2.0 (USB High Speed) standards. The approximate USB bus speeds are shown below.
Actual bus speeds will vary, depending on the CPU speed, memory, speed of the network, and 
other variables.
The 108 Mbps Wireless Media Router WGT634U should work with all USB-compliant external 
flash and hard drives. For the most up-to-date list of USB drives supported by the WGT634U 
Router, go to: 
http://kbserver.netgear.com/kb_web_files/n101300.asp 
The USB port on the 108 Mbps Wireless Media Router WGT634U can only be used to connect 
USB storage class devices like hard drives. USB modems, printers, CD ROM drives, and DVD 
drives cannot be connected to the WGT634U Wireless Media Router. 
Note: 
The USB port on the WGT634U can be used with one USB hard drive at a time. Do not 
attempt to use a USB hub attached to the USB port.
The WGT634U supports FAT, FAT32, NTFS (read only) and Linux file systems. As soon as a USB 
hard disk or flash memory is attached to WGT634U USB port, users on the local area network can 
access the USB drive with full read and write access. 
Using the USB Drive Setup Wizard to Allow Remote Access 
from the Internet
You can use the USB Drive Wizard to quickly and easily share directories on the USB drive after 
you have attached it to the router.
1.
Log in to the WGT634U router at its default LAN address of 
http://192.168.1.1
 with its default 
user name of admin and default password of password, or using whatever LAN address and 
password you have set up.
Table 5-1.
USB Bus Speeds
Bus Name
Speed/Second
USB 1.1
12 Mbits
USB 2.0
480 Mbits