Netgear WGX102 참조 매뉴얼

C-6

Preparing Your Network

If you need to install a new adapter, follow these steps:

a.

Click the Add button.

b.

Select Adapter, and then click Add.

c.

Select the manufacturer and model of your Ethernet adapter, and then click OK.

If you need TCP/IP:

a.

Click the Add button.

b.

Select Protocol, and then click Add.

c.

Select Microsoft.

d.

Select TCP/IP, and then click OK.

If you need Client for Microsoft Networks:

a.

Click the Add button.

b.

Select Client, and then click Add.

c.

Select Microsoft.

d.

Select Client for Microsoft Networks, and then click OK.

3. Restart your PC for the changes to take effect.

After the TCP/IP protocol components are installed, each PC must be assigned specific 
information about itself and resources that are available on its network. The simplest way to 
configure this information is to allow the PC to obtain the information from a DHCP server in the 
network. 

You will find there are many similarities in the procedures for different Windows systems 
when using DHCP to configure TCP/IP.

It is not necessary to remove any other network components shown in the 

Network window in order to install the adapter, TCP/IP, or Client for Microsoft 
Networks.