Netgear WGX102 참조 매뉴얼
Reference Manual for the 54 Mbps Wall-Plugged Wireless Range Extender WGX102
2-2
Introduction
September 2004 202-10042-01
The WGX102 Wall-Plugged Range Extender provides the following features:
•
802.11g wireless networking, with the ability to operate in 802.11g-only, or 802.11b+g modes.
•
Easy, Web-based setup for installation and management.
•
Extensive protocol support.
•
Login capability
•
Front panel LEDs for easy monitoring of status and activity.
•
Flash memory for firmware upgrades.
802.11g Wireless Networking
The WGX102 Wall-Plugged Range Extender includes an 802.11g wireless access point, providing
continuous, high-speed 54 Mbps access between your wireless and wall-plugged devices. The
access point provides:
continuous, high-speed 54 Mbps access between your wireless and wall-plugged devices. The
access point provides:
•
802.11g wireless networking at up to 54 Mbps.
•
Operates in 802.11g-only, 802.11b-only, or 802.11g and b modes. Provides backwards
compatibility with 802.11b devices or dedicates the wireless network to the higher bandwidth
802.11g devices.
compatibility with 802.11b devices or dedicates the wireless network to the higher bandwidth
802.11g devices.
•
64-bit and 128-bit WEP encryption security.
•
WEP keys can be generated manually or by passphrase.
•
WPA-PSK support. Support for Wi-Fi Protected Access (WPA) data encryption which
provides strong data encryption and authentication based on a pre-shared key.
provides strong data encryption and authentication based on a pre-shared key.
•
Wireless access can be restricted by MAC address.
•
Wireless network name broadcast can be turned off so that only devices that have the network
name (SSID) can connect.
name (SSID) can connect.