Netgear WGX102 참조 매뉴얼

Installing the XE102 and the WGX102

3-7

c.

You may connect additional XE102 bridges to connect more computers to your network.

Wireless security is disabled by default on the WGX102. For information about configuring 

the WGX102 to use security settings, see 

.

Verify wireless connectivity. Connect to the Internet or log in to the range extender from a 
computer with a wireless adapter. For wireless connectivity problems, see 

.

You are now wirelessly connected to the Internet! Implement wireless security according to the 
instructions in 

Here are some tips for correcting simple problems you may have.

1) Turn off the modem, range extender, and computer; 2) Turn on the modem, wait two 
minutes; 3) Turn on the range extender and wait one minute; 4) Turn on the computer. 

The Internet status light on the range extender will be lit if the Ethernet cable from the XE102 
to your router is plugged in securely and the modem and router are turned on. 

The Wireless Network Name (SSID) and WEP or WPA settings of the router and wireless 
computer must match exactly. 

LAN and wirelessly connected computers must be configured to obtain an IP address 
automatically via DHCP. Please see 

 or the animated 

tutorials on the CD for help with this.

•

If the Power light does not turn solid green within two minutes after turning the range extender 
on, reset the range extender according to the instructions in 

•

If the Wireless light does not come on, verify that the wireless feature is turned on according to 
the instructions in