Netgear WGX102 참조 매뉴얼

5-6

Wireless Configuration

When you first receive your WGX102, the default factory settings are shown below. You can 
restore these defaults with the factory default reset button on the bottom of the unit. 

After you install the WGX102 Wall-Plugged Range Extender, use the procedures below to 
customize any of the settings to better meet your networking needs.

Follow the instructions below to set up and test basic wireless connectivity. Once you have 
established basic wireless connectivity, you can enable security settings appropriate to your needs.

1. Log in to the WGX102 Wall-Plugged Range Extender at its default LAN address of

 

with its default user name of admin and default password of password, 

or using whatever LAN address and password you have set up.

Wireless Access List (MAC Filtering)

SSID broadcast 

SSID 

802.11b/g RF Channel

Mode

Authentication Type

WEP and WPA-PSK

If you use a wireless computer to configure WPA settings, you will be 

disconnected when you click Apply. Reconfigure your wireless adapter to match the 
new settings or access the range extender from a wired computer to make any further 
changes.