Netgear WGX102 참조 매뉴얼

Advanced Configuration of the WGX102

8-1

This chapter describes how to configure the advanced features of your 54 Mbps Wall-Plugged 
Wireless Range Extender WGX102 in Router Mode. These features can be found under the 
Advanced heading in the main menu of the browser interface.

.

•

If you are using the WGX102 Wall-Plugged Range Extender in Access Point Mode, the only 
Advanced menu option is LAN IP Setup and the configuration options are different than the 
Router Mode options. See 

 for more information. 

•

If you are using the WGX102 Wall-Plugged Range Extender in Router Mode, you will see 
additional Advanced features such as Port Forwarding and Triggering, WAN Setup, Dynamic 
DNS, Static Routes, Remote Management, and UPnP. These features are described in the 
following sections.

Port Triggering is an advanced feature that can be used to easily enable gaming and other internet 
applications. Port Forwarding is typically used to enable similar functionality, but it is static and 
has some limitations. 

If you use applications such as multi-player gaming, peer-to-peer connections, real time 

communications such as instant messaging, or remote assistance (a feature in Windows XP), you 
should also enable UPnP according to the instructions at 

.

Note: If you are unfamiliar with networking and routing, refer to 

, to become more familiar with the terms and 

procedures used in this chapter.

Note: This feature and the rest of the features in this chapter are only displayed if you are 
using the WGX102 in Router Mode. See 

 for more information on Router Mode configuration.