Netopia 2e-h 사용자 가이드
Using the Command Line Interface
Cayman 2E-H User’s Guide
4-18
November 2000
option (off) [on | off]:
on
You can accept the default value for a field by pressing the Return
key. To use a different value, enter it and press Return.
key. To use a different value, enter it and press Return.
You can enter the CONFIG step mode by entering
set
from the top
node of the CONFIG hierarchy. You can enter step mode for a
particular service by entering
particular service by entering
set service_name
. For example:
Dogzilla (top)>>
set system
Stepping set mode (press Control-X <Return/Enter> to
exit)
...
system
name (“Dogzilla”):
Mycroft
Diagnostic Level (High):
medium
Stepping mode ended.
Validating Your
Configuration
Configuration
You can use the validate CONFIG command to make sure that your
configuration settings have been entered correctly. If you use the
configuration settings have been entered correctly. If you use the
validate
command, the Cayman 2E-H verifies that all required
settings for all services are present and that settings are consistent.
Dogzilla (top)>>
validate
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the
validate
command to verify your configuration
settings at any time. Your Cayman 2E-H automatically validates your
configuration any time you save a modified configuration.
configuration any time you save a modified configuration.