Netopia r7100-c 참조 가이드
WAN and System Configuration 8-3
The default profile
The Default Profile screen controls whether or not the DSL link will come up without an explicitly configured
connection profile. See
connection profile. See
for more information. You access the Default Profile
screen from the Main Menu by selecting WAN Configuration and then selecting Default Profile.
The Default Profile screen appears.
■
You can set Must Match a Defined Profile item to Yes or No (the default). This item controls whether or
not the DSL link will come up without an explicitly configured connection profile. If your ISP is ser ving you a
dynamic IP Address, you need not explicitly configure a connection profile, and the default behavior of the
router will be to connect automatically once it is powered on.
not the DSL link will come up without an explicitly configured connection profile. If your ISP is ser ving you a
dynamic IP Address, you need not explicitly configure a connection profile, and the default behavior of the
router will be to connect automatically once it is powered on.
■
If Must Match a Defined Profile is set to No, then an IP Enabled item is visible. Toggling this item to Yes
(the default) or No controls whether or not IP will be suppor ted on the DSL link. If IP Enabled is set to Yes,
an IP Parameters item becomes visible. If you select IP Parameters the IP Parameters screen appears
(see
(the default) or No controls whether or not IP will be suppor ted on the DSL link. If IP Enabled is set to Yes,
an IP Parameters item becomes visible. If you select IP Parameters the IP Parameters screen appears
(see
). This screen allows you to configure various IP
parameters for DSL connections established without an explicitly configured connection profile.
■
If Must Match a Defined Profile is set to No, then an IPX Enabled item is visible. Toggling this item to Yes
or No (the default) controls whether or not IPX will be suppor ted on the DSL link. If IPX Enabled is set to
Yes, an IPX Parameters item becomes visible. If you select IPX Parameters, the IPX Parameters screen
appears (see
or No (the default) controls whether or not IPX will be suppor ted on the DSL link. If IPX Enabled is set to
Yes, an IPX Parameters item becomes visible. If you select IPX Parameters, the IPX Parameters screen
appears (see
). This screen allows you to configure
various IPX parameters for DSL connections established without an explicitly configured connection profile.
Main
Menu
WAN
Configuration
Default
Profile
Default Profile
Must Match a Defined Profile: No
IP Enabled: Yes
IP Parameters...
IP Parameters...
IPX Enabled: Yes
IPX Parameters...
IPX Parameters...
Return/Enter accepts * Tab toggles * ESC cancels.
Configure Default WAN Connection Parameters here.
Configure Default WAN Connection Parameters here.