Quantum DAT 160 참조 가이드

Installing a DLT, SDLT, VS, LTO, or DAT Tape Drive Into a Linux Operating System

6464215-01, Rev B

January 2006

Appendix D – Troubleshooting

32

The 

 driver does not see all 

attached tape devices.

The connector cable may be 

too long.

Verify that the connector cable length 

does not exceed the specifications listed in 

your product manual. 

Your SCSI bus may not be 

terminated properly.

Ensure the SCSI bus is terminated 

properly (see your product manual for 

instructions).

You don’t have enough 

 

tape device nodes.

Verify that you have enough 

 tape 

device nodes for all your attached tape 

devices. If you need to create more, see 

instructions in the following sections:
•

•

•