Quantum atl 7100 설치 설명서
Appendix A SCSI Cabling Options
Single-Wire Configuration
Quantum|ATL 7100 Series Facilities Planning and Installation Guide
35
Single-Wire Configuration
1
This configuration of the library has all of the SCSI devices on a
single SCSI bus from the host controller. The host SCSI bus
connects to the rear panel connector labeled
single SCSI bus from the host controller. The host SCSI bus
connects to the rear panel connector labeled
SCSI PORT 1
and is
externally terminated at the connector labeled
SCSI PORT 4 (
see
The rear panel connectors labeled
SCSI PORT 2
and
SCSI PORT 3
are not used in this configuration.
Note:
The spare SCSI cable from the accessories kit is required
to configure the library in a single-wire configuration.
to configure the library in a single-wire configuration.